Hella LED Safety DayLights Kit - 15° - 12 Volt

Stock Code:
435630
Hamilton
Low Stock
Christchurch
Out of Stock
Price:
$150.28 Excl. GST

Hella Part No: 2PT 980 860-841
Hella Legacy Part No: 5630

Be safe. Be seen. With HELLA’s Safety DayLights™. The forward facing signal lamps enhance the visibility of your vehicle significantly to other road users during daylight hours and thereby reduce the risk of an ‘accidental oversight’ collision. Failure to see a vehicle approaching, especially at intersections, has been identified as one of the most significant factors in daytime accidents.

Designed to be mounted on vehicles with flat fronts or motorbikes.

Easy-Fit installation
No extra parts required. LED lamp clips easily into place once wiring is complete and bracket is fitted.

“Never forget” safety enhancement
Safety DayLights™ will automatically switch ON once ignition is activated and turn OFF when headlights or park lamps are turned on.

Maximal visibility – Minimal power consumption
With a super low power consumption of only 2 watt the LED lights use 95 % less energy than dipped beam headlamps, saving 0.2 litres of fuel per 100 km.

Tough under pressure
Completely sealed, maintenance free. Designed to withstand high pressure washing and temporary submersion.

Reliable – durable – ultra long service life
Superior materials feature UV, corrosion, impact and shock resistance ensuring an ultra long service life.

Approved for use in New Zealand and Australia

Mounting: Suitable for horizontal mounting.
Power Consumption: 2W
Protection: Reverse polarity protection.
Protection: IP 6K7 (Protection against dust and temporary water immersion)
Protection: IP 6K9K (Protection against dust and high-pressure/steam jet cleaning)
Cable Length: Pre-wired with 2.5m of sheathed multi-core cable.
Lens Material: High impact acrylic.
Compliance: ADR 76/00
Compliance: E24 5875
Compliance: ECE R87/00

Kit Contents:
2 x LED Safety DayLights
2 x Mounting brackets
6 x Mounting screws
1 x Changeover relay
1 x Instruction sheet

Mounting

Suitable for horizontal mounting.

Power Consumption

2W

Protection

Reverse polarity protection.
IP 6K7     (Protection against dust and temporary water immersion)
IP 6K9K   (Protection against dust and high-pressure/steam jet cleaning)

Cable Length

Pre-wired with 2.5m of sheathed multi-core cable.

Lens Material

High impact acrylic.

Compliance

 E24 5863  ECE R87/00 ADR 76/00

Kit Contents

LED Safety DayLights™ Kit   LED Safety DayLights™ Kit - Blister Pack
P/Ns 5630 / 5630-24V   P/Ns *5630-BL / *5630-24VBL
2 x LED Safety DayLights™   2 x LED Safety DayLights™
2 x Mounting brackets   2 x Mounting brackets
6 x Mounting screws   6 x Mounting screws
1 x Changeover relay   1 x Advanced smart controller relay
1 x Instruction sheet   1 x Terminal kit
    1 x Instruction sheet

Customer Reviews and Ratings

No Reviews

Be the first to review this product!